TRENDnet TEW-652BRP Guía De Instalación Rápida página 10

Ocultar thumbs Ver también para TEW-652BRP:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Q4:
I went through the Wizard, but I can not get onto the Internet. What should I
do?
A4:
First, verify that you can get onto the Internet with a direct connection into your
modem. Second, contact your ISP and verify all the information that you have in
regards to your Internet connection settings is correct. Third, power cycle your
modem and router. Unplug the power to the modem and router. Wait 30
seconds, and then reconnect the power to the modem. Wait for the modem to fully
boot up, and then reconnect the power to the router.
Q5:
I can not make a wireless connection to the Router. What should I do?
A5:
First, make sure that the antenna is connected to the TEW-652BRP. Second,
double check that the WLAN light on the Router is lit. Third, power cycle the TEW-
652BRP. Unplug the power to the TEW-632BRP. Wait 15 seconds, then plug the
power back in to the TEW-652BRP. Fourth, contact the manufacturer of your
wireless network adapter and make sure the wireless network adapter is
configured with the proper SSID. The preset SSID is TRENDnet.
If you still encounter problems or have any questions regarding the TEW-652BRP,
please contact TRENDnet's Technical Support Department.
8

Publicidad

Tabla de contenido
loading

Tabla de contenido