Goclever HCAMEYE Guia De Inicio Rapido página 4

GB
Turning on Goclever Eye for the first time.
1. Plug in the camera to a power supply.
2. Connect the camera to a LAN router via a LAN cable.
IMPORTANT: It is necessary for the camera to be connected to the
router via a LAN cable during the first setup.
3. The camera will calibrate the LAN connection, and, after a moment,
it will be online ready for further configuration. Goclever Eye can be
operated via a PC or mobile devices.
IMPORTANT: the devices must be connected to the same LAN network.
Using Goclever Eye with a PC
In order to use the camera via a PC download our Goclever Eye PC
software from www.goclever.com/goclevereye or open the
web user interface available for Internet Explorer and Firefox. The
recommended web browser is Internet Explorer.
a) Using Goclever Eye PC client
1. Go to www.goclever.com/goclevereye and choose support to
download Goclever Eye PC client.
2. Install it and launch it
3. Go to "System", choose "Device List" and wait for a new window to
pop up. Select "Open search tools" and seek the available camera.
4. The name of the camera will display in the "Device" column. In order
to add it to the list of devices, double click on its name and click "Ok" in
the pop-up window. Close the list of devices.
5. The camera will be displayed in the "Camera List" in the bottom left
corner. In order to begin live streaming, double-click the camera name
(there is a triangle with an exclamation mark next to it) and drag it
to the main screen of the client. The live streaming will begin and the
triangle will change into a green lamp indicating that the camera is
online.
6. The Goclever Eye PC client allows users to turn on the Wi-Fi support
of the camera. Select the name of the camera from the "Camera list"
and double-click it. In the new window go to "Wi-Fi", click "Scan",
choose the network, insert the password and press "Set up" to reboot
the camera. The LAN cable is no longer needed.
3