Goclever HCAMEYE Guia De Inicio Rapido página 5

GB
b) Using the web user interface (Internet Explorer)
1. Go to www.goclever.com/goclevereye to download Search_tool
program
2. Launch the program and hit the "Refresh" button to allow the
program seek available cameras. When its name appears in the upper-
left corner, double-click the name to launch the web browser.
3. The web browser will ask to give the username and password. The
username is admin and the password is not set by default. Click "Ok"
to accept it.
4. The web browser will launch and redirect to the user interface page.
5. In order to get full functionality of the camera and user interface,
"oPlayer" plug-in must be installed. The browser will notify the user how
to install the plug-in at the bottom of the page with a red notification.
After installation, refresh the page with the user interface.
6. To start the live stream click "livestream mode (for Internet Explorer)
7. The web user interface allows users to turn on the Wi-Fi support
of the camera. Go to settings, select "Network configuration", choose
"Wireless Lan Settings". Then, click „Scan", choose the Wi-Fi network
you are connected to, insert the password and press the „Set Up" button
to reboot the camera. The LAN cable is no longer needed.
8. Launch Search_tool once again to seek the camera. When its name
appears in the upper-left corner, double-click the name to launch the
web browser.
Using Goclever Eye with a mobile application (Android)
1. Scan the QR code placed on the package or go to Google Play™ store
to search for Goclever Eye app in order to install it in your mobile device
2. Run the app and click "Add new camera". The name of the camera
is up to the user. The rest of the gaps can be filled in in three ways:
• Manually – Find the ID beneath the camera. The username is admin,
whereas the password is not set by default
• QR code scanner – the application automatically fills in all the
necessary information. The QR code is beneath the cam.
• Search function – the application automatically searches for the
camera in the network and then fills in all the necessary information.
In order to accept the changes press "Done"
3. The camera will show up in the main menu. If it is connected to
the network in a proper way its status will change to "Connected to
network". In order to start live stream press the name of the camera.
4. The mobile application allows users to turn on the Wi-Fi support. Go
to settings (press icon), choose "Wi-Fi settings", press "Wi-Fi manager"
to find your wireless network and insert the password. Press "Done" to
reboot the camera. The LAN cable is no longer needed.
4