Cleaning And Maintenance - Krups 3L Manual Del Usuario

„ Place the glass carafe (17) on the heating plate (18) Fig. 16.
„ Switch on the appliance by pressing the Grind and Brew button (1). The cup-of-coffee
symbol (E) appears (Keep warm function) Fig. 15.
„ After a few seconds, the appliance starts grinding the coffee beans and making the coffee.
„ To interrupt the process, press the Grind and Brew button (1).
„ If the process is completed, the appliance will beep and switch to keep-warm mode.
The cup-of-coffee symbol (E) starts flashing. The appliance can be switched off by
pressing the Grind and Brew button (1) or the appliance switches off automatically after
2 hours.
Making coffee with ground coffee
Before you proceed, we would like you to focus your attention on the following notes:
„ Only use ground coffee.
„ Only use paper coffee filters or the permanent filter.
„ Fill the water reservoir (15) with the required amount of water.
„ Do not fill the water reservoir with more water than required for making the coffee.
„ Press the Release button (12) to open the filter holder Fig. 6.
„ Place a suitable paper filter or permanent filter in the coffee filter holder (10) Fig.7a or 7b.
„ Put the required amount of coffee in the coffee filter Fig. 12.
„ Close the filter holder compartment until the Release button (12) clicks into place.
„ Place the glass carafe (17) on the heating plate (18) Fig. 16.
„ Switch on the appliance by pressing the Grind off button (2). Press the Grind and brew
button after pressing Grind off button for the coffee symbol to appear.
„ To interrupt the process, press the Grind and brew button (1).
„ If the process is completed, the appliance will beep and switch to keep-warm mode.
The cup-of-coffee symbol (E) starts flashing. The appliance can be switched off by
pressing the Grind off button (2) or the appliance switches off automatically after 2 hours.
Setting the coffee quantity
ONLY for « Grind / Brew », NOT applicable for « Grind Off ».
The coffee strength selector (7) is used for setting the required coffee strength. The coffee
strength selector (7) can be set to mild coffee (MILD), medium coffee (MEDIUM) and strong
coffee (STRONG).
Setting the coffee strength (B)
ONLY for « Grind / Brew », NOT applicable for « Grind Off ».
The coffee strength selector (7) is used for setting the required coffee strength. The coffee
strength selector (7) can be set to mild coffee (MILD), medium coffee (MEDIUM) and strong
coffee (STRONG) Fig. 14.
Note: The appliance can only be used when the display is activated. If the display is not
activated, press any button to activate the display. The appliance is ready for use.
„ Repeatedly press the coffee strength selector (7) to set the coffee strength. The coffee
strength (B) is shown on the display (8).
Setting the ground coffee fineness (Fig. 8)
The ground coffee fineness selector (9) is used for setting the required fineness of the
ground coffee when using coffee beans. The ground coffee fineness selector (9) can be set
to different positions from fine ground coffee to coarse ground coffee.
„ Turn the ground coffee fineness selector (9) to the required position to set the fineness of
the ground coffee.
6
Auto start function
The appliance has an auto start function which makes it possible to program the time for
starting the coffee-making process.
Note: The appliance can only be used when the display is activated. If the display is not
activated, press any button to activate the display. The appliance is ready for use.
„ Set the clock. Check whether the clock has already been set. If the clock has not been
set, refer to the section "Setting the clock".
„ Keep the Auto start button (5) pressed until the clock on the display flashes.
„ Repeatedly press the Hour button (6) to set the hours.
„ Repeatedly press the Minutes button (7) to set the minutes.
„ Set the coffee quantity. Refer to the section "Setting the coffee quantity".
„ Set the coffee strength. Refer to the section "Setting the coffee strength".
„ If you want to make coffee with ground coffee, switch off the grinding function before
using the auto start function.
„ Press the Auto start button (5) to save the settings. The timer indicator (C) light will
continuously appear.
„ To interrupt the process, press the Auto start button (5) again. The timer indicator (C) will
turn off.

ClEANiNg AND MAiNTENANCE

„ To dispose of used ground coffee, remove the filter and the filter holder (10) of the coffee
maker.
„ Throw the coffee grounds and filter paper in the garbage.
„ Do not clean the appliance if it is still hot.
„ Wash the carafe (17), the removable filter holder (10) and the permanent filter (11) with
warm, soapy water.
„ CAUTION: Do not place the carafe (17) in the microwave.
„ Do not put any parts of the coffee maker into the dishwasher.
„ Clean the coffee maker with a damp cloth or sponge. Never use abrasive or strong
products on any part of the coffee maker.
„ To clean the stainless steel parts of your coffee maker, dampen a soft cloth or sponge
with warm water. Wipe carefully with a dry cloth.
„ For difficult stains, use a cloth with white vinegar.
„ Do not immerse the appliance in water or under the faucet.
Cleaning the grinding compartment (Fig. 10 and 11)
When grinding coffee beans, coffee powder can clog the grinding mechanism. The grinding
compartment (19) should be cleaned at least every 2 weeks to prevent the grinding
mechanism from being clogged.
„ Before you proceed, we would like you to focus your attention on the following notes:
– Before cleaning the grinding compartment, take the following actions:
– Switch off the appliance.
– Remove the plug from the wall socket.
– Remove the coffee carafe (17) from the heating plate (18).
– Empty the coffee filter holder (10). Place a suitable coffee filter. Close the filter holder
compartment.
„ Remove the cover by pressing with a tooth pick or similar non metallic object and pulling
7