For One Wall Storage Rack - Husky 44602 Guía De Uso Y Mantenimiento

Assembly (for one Wall Storage Rack)
3
Install left side
□ Loosen the large bolts (BB) that join the vertical base
brackets (D1) to the top wall mount base assembly (H1).
Add horizontal shelf support (A1) to the inside of the
U-channel in the vertical base brackets (D1).
Hand tighten. See inset A.
□ Add a large bolt (BB) through the second hole in the vertical
base assembly bracket (D1). Add the short support bracket
(E1) to the inside of the top wall mount base assembly (H1)
and hand-tighten the large nut (FF). See inset A.
□ Loosen the large bolt (BB) that joins the vertical base assembly
bracket (D1) and the base assembly bottom bracket (G1)
at the bottom of the bracket (D1). Add the diagonal shelf
support bracket (C1) to the inside of the U-channel on (D1).
Hand tighten. See inset B.
□ Add a large bolt (BB) through the hole in the center
of the diagonal shelf support bracket (C1) to secure
the short diagonal support bracket (E1) to the inside
of (C1). Hand tighten. See inset C.
4
Install right side
□ Repeat step 3 for the right side.
Interior Exterior
FF LL KK BB
BB, KK
A
x 2
FF, LL
BB
D1
C1
LL, FF
B
H1
KK, BB
FF, LL
6
Exterior Interior
x 2
KK LL FF
H1
A1
E1
G1
LL, FF
BB, KK
C
B1
E1
D1
G1
KK, BB
FF, LL
D1
LL, FF
BB, KK
C1