Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
WARNING: This appliance is equipped with a three-prong (grounding) plug
for your protection against shock hazard and must be plugged directly into a
properly grounded three-prong receptacle.
Firebox must be disconnected from gas supply and removed from mantel
before installing fan accessory. Contact a qualified service person to do this.
BLOWER INSTALLATION (OPTIONAL)
1.
Remove Blower Top Access Panel
and Bottom Panel.
2.
Mount Blower (B) onto bottom of
Fireplace Top using 4 screws (F).
3.
Pre-thread the Power Cord
Screws. Attach Power Cord (A) to
Blower Access Panel.
4.
Attach Temperature Sensor (C) to
the Combustion Top using 2 sheet
metal screws.
FF
1
C
Access Panel
2
3
4
Combustion Top
Mounting Holes
4
Regulator
Power Cord
Access Panel
Senser
Bracket
Screws
Sheet
Metal
Screws
Publicidad
Tabla de contenido
