Bürkle Vampire Instrucciones Para El Uso página 5

500 mPas) from a maximum suction depth of 5 m.
` ` The instrument is suitable for sampling liquids from
0 - 40 °C.
` ` For chemically demanding applications use pump
hose made of Marprene (beige, durable), for food
applications use pump hose made of silicone
(transparent).
` ` The instrument is only suitable to take samples and
not for continuous operation.
` ` The instrument is suitable for filling open sampling
bottles.
` ` Only use the instrument with the recommended
sample bottles specified in the accessories.
` ` Protect the instrument against effects of weather
exposure during storage.
Parts in contact with medium
` ` PE (Suction hose)
` ` PP (Hose connector)
` ` Marprene or silicone (Pump hose)
` ` LDPE (Sample bottle)
Scope of delivery
2 x Pump hose (1x Marprene, 30 cm;
1 x Silicone 30 cm)
1 x Pump head
1 x Suction hose , PE, 5 m
1 x Hose connector, PP
1 x Bottle basket
1 x Sample bottle, LDPE, 250 ml
1 x Bosch drive unit
2 x Rechargeable battery
1 x Battery charger
` ` Check delivery for completeness and transport damage.
` ` Point out any damage in the packaging to the
freight forwarder/supplier immediately.
Assembly
1. Insert the pump hose  into the pump head .
2. Cut the suction hose  off to the required length and
attach it to the pump hose  with the hose connector .
3. Fix the bottle basket  in place with the tightener .
CAUTION!
The mounting bracket may break.
` ` Do not load the suspension too heavily (max. 2 kg).
` ` Check the bottle basket to ensure it is properly
seated. Allow the end of the holding rod to
protrude out about 5 cm upward.
` ` Wear appropriate protective clothing.
4. Place the sample bottle  in the bottle basket .
5. Insert the pump hose  about 1 - 3 cm into the
sample bottle .
NOTE!
Allow the pump hose to protrude loosely into the
sample bottle.
CAUTION!
Bursting of hoses and hose connectors due to wear
or chemical stress.
` ` Carry out a visual inspection every time before using.

6. Place the pump attachment  in the holder  of
the Bosch drive unit . Turn the locking ring
the direction


NOTE!
Follow the safety instructions for the Bosch drive

unit and pump head.

Safe sampling


CAUTION!
Possibility of electrical shock.
14
` ` Follow the instructions of the drive manufactu-
15
rer/battery charger manufacturer.
1. Set the gear selector switch
speed range).
2. Lower the suction hose  into the sample liquid.
3. Press the On/Off switch
CAUTION!
Risk of atomisation. Ingress of liquids in the instrument.
` ` In case of uncontrolled escape of hazardous
liquid, interrupt the sampling immediately and
remove the Bosch drive unit.
` ` Contact the dealer or manufacturer.
English
until you hear it snap into place.
to „Gear 1" (low
1 2
to take the sample.
1 3
in
1 1