Remote Switch; Intended Use; Delivery Content; Safety Instructions - IVT FS-01 Manual De Instrucciones

Operating Instructions
Remote switch FS-01/FS-02
INTRODUCTION
Dear customer,
thank you very much for the trust you have placed in us. You acquired
a remote switch, which is compatible with all voltage inverters of the
DSW series. It provides you with the possibility to operate your DSW
voltage inverters easily and safely even at installation sites, which are
difficult to access. Please read the instructions for use carefully and
completely prior to putting your remote switch into operation.

INTENDED USE

This remote switch is designed exclusively to be used with the digital
sinus voltage inverter of the DSW series. It allows you to switch the
inverter on and off.
The user must ensure that the device is protected against humidity and
damp. Any other use than described before may damage this device; in
addition, improper use may result in serious hazards, such as short-circu-
iting, fire, electrical shock etc.. The entire product must not be modified or
converted and the housing must not be opened in any manner whatsoever.

DELIVERY CONTENT

• Remote switch FS-01 (mounted version) / FS-02 (installation version)
• Connection wire (4 m)
• Mounting screws (4 x)
• Manual
10 3 years manufacturer's warranty. Rechargeable batteries excluded.

SAFETY INSTRUCTIONS

The following safety notes and hazard warnings serve not only for
the protection of the device but also for the protection of your health.
Please read the following points thoroughly.
In case of property damage or personal injuries caused by improper
handling or non-observance of these operating instructions or the
safety notes stated herein, the warrant/guarantee expires. We assume
no liability for any consequential damages!
General
• For safety and technical approval reasons (CE), the unauthorized conversion and/
or modification of theproduct is not permitted.
• The connected voltage inverter provides an output of 230 V AC. Even in switched-
off condition charged capacitors may still produce 230 V AC at the output for a
short time.
• This device is no toy and must not be used by children!
Please ensure childproof operation and storage of the device at any time.
• Maintenance, installation or repair works may only be performed by an expert/
qualified workshop. Use only original spare parts for repair work. The use of any
other spare parts may lead to serious damage to property and personal injury!
The interior of the device does not contain any product components which must
be set or maintained by you.
• Don't leave packaging material heedlessly. It could become a hazardous toy for
children!
• If you detect damages, stop operating the device.
Bring it to a qualified workshop or dispose of it in an environmentally compatible
manner.
More information at www.ivt-hirschau.de 11