Led Indicators; Technical Specifications - IVT FS-01 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18

LED INDICATORS

The LED status indicators for DC input and AC output provide important
information on the operating status of your inverter. Both LEDs work in-
dependently from one another. A failure in the DC input area has direct
impact on the function of the AC output; or a failure in the output area
affects the input function directly.
Operating status/
fault indicators
Device is switched on and ready
for operation
Early warning for deep discharge
protection
Cut-off due to deep discharge
protection
Overvoltage on the input
Short-circuit or overload on output
14
3 years manufacturer's warranty. Rechargeable batteries excluded.
LED for DC input (2)
LED for AC output (3)
Lights up
Lights up
Slow blinking
Lights up
Fast blinking
Fast blinking
Fast blinking
Fast blinking
Fast blinking
Fast blinking

TECHNICAL SPECIFICATIONS

Modell
Remote switch FS-01
Operating voltage
10 – 32 V DC
Current consumption (activ)
200 mA
Housing
Plastic
Connection cable
4 m
Dimensions
50 x 38 x 28 mm
Weight
60 g
Item No
430111
ENVIRONMENTAL PROTECTION NOTE
At the end of its useful life, this product must not be disposed of together with
normal household waste, but has to be dropped off at a collection centre for the
recycling of electrical and electronic devices. This is indicated by the symbol on
the product, on the instruction manual or on the packaging. The materials of which
this product is made are recyclable pursuant to their labeling. With the reuse, the
recycling of the materials or other forms of scrap usage you are making an
important contribution to the protection of the environment. Please ask your local
administration office for the appropriate disposal center.
Technical specifications are subject to change.
We assume no liability for typographical errors. V3_06/2018
IVT Innovative Versorgungstechnik GmbH, Dienhof 14, D-92242 Hirschau
Phone: 09622-719910, fax: 09622-7199120;
info@ivt-hirschau.de; www.ivt-hirschau.de
More information at www.ivt-hirschau.de
Remote switch FS-02
10 – 32 V DC
200 mA
Metal
4 m
85 x 47 x 24 mm
40 g
430121
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Fs-02430111430121

Tabla de contenido