Targa TAG-6900 Manual De Istrucciones página 5

OPERATING INSTRUCTIONS
1. POWER ON/OFF
Insert the front panel in the unit and push Power button in order to switch on the unit. Push
button newly in order to switch off the unit and push REL button (15) to release the front
panel.
Note: Never release the front panel when the unit is on. Power remains on even when car
radio is off.
2. SELECT
3. VOLUME UP/DOWN
Turing the VOL knob to right or left (3) to control the VOLUME. To select other functions, press
the SEL (2) button shortly until the desired functions is shown on the display. Figure 1 shows
how control functions are selected using the SEL button.
1
1. VOLUME
These buttons can be used to adjust the BASS, TREBLE, BALANCE and FADER.
AUDIO DSP CONTROLS (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these
function.
2 sec.
SEL DSP
DSP can be selected by turing the VOL knob to right or left (3)
POP M---ROCK M---CLASS---FLAT M---DSP OFF
BEEP MODE (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these
function.
2 sec.
SEL DSP
BEEP ON: BEEP sound can be heard from speaker when the buttons are pressed.
SEEK MODE (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these
function.
2 sec.
DSP
SEL
SEEK 1: When SEEK 1 mode is activated, AUTO SEEK SCAN is stopped when station is
detected even user still push SEEK button.
SEEK 2: Auto SEEK SCAN is not stopped even station is detected if user push SEEK button.
When release this SEEK button, then stop when station is defected.
VOL LAST/ADJUST (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these
function.
2 sec.
DSP
SEL
VOL LAST: The volume level which user adjust lately is selected whenever power is ON and OFF.
VOL ADJ: The initial volume level (user can adjust) is selected whenever power is ON and OFF
2 3 2
Fig. 1 Selection of sound control functions
2. SELECT 3. BASS
POP M --- ROCK M --- CLASS --- FLAT M --- DSP OFF
VOL
SEL BEEP
BEEP
SEL
BEEP
SEL SEL
4 2
4. TREBLE
ON/OFF
VOL
SEEK
SEL
VOL
SEEK SEL
E-4
5 2 6
5. BALANCE
SEEK1 / SEEK 2
VOL LAST /
VOL LAST
VOL
2
6. FADER
VOL ADJ