M I N I N E T S E T- U P.
1. Slip one end the net sleeve halfway down the Net support tube.
a. On the other end, insert a Net Support Tube (#2) into the net sleeve, then slide tube (#2) into the end base (#1) . Slide the first sleeve
all the way down at this time.
b. Position the Net Sleeve and Velcro strap about 1/2" from the bottom of the plastic cap of the Net Support Tube, this will keep the net
at 36" at the sideline. Use the velcro straps to keep net from sagging as shown in Detail C. Repeat for other end of the net.
TAKE-DOWN:
1. For easier disassembly & re-assembly keep net support tubes in net sleeves then roll net and store in the carry bag. Take-down of Frame
assembly is reverse of Set-up.
WINDY CONDITIONS:
For windy conditions we recommend using canopy weights (not included) on both end bases to keep the nets in place. See Detail D.
Weighs can be purchased at:
www.canopyweights.com
16
-5-
Plastic Cap
12
Detail C
Canopy weights
(not included)
2
Detail D
1