Use; Operation (Turn Off) - FireWare Phoenix Silkflame Manual De Instrucciones

User Manual
EN
FireWare Phoenix Silkflame
4.

Use

Remove all the packaging material of the FireWare Phoenix Silkflame. Connect all the cables.
Please note: do not connect the power before the entire system has been set up and
properly connected.
1. Place the machine on a level base.
2. Open the lid of the box.
3. The Silk Flame (cloth) must be attached to the holder on top of the machine.
4. Use the knobs on either side of the Silk Flame holder to set the required height.
5. The FireWare Phoenix Silk Flame plug can be inserted into a standard, grounded 230 Volt
socket or extension lead.
6. You can subsequently switch the machine on with the black ON/OFF button.
5.

Operation (turn off)

When the appliance is in use you can turn off the flames at any time by turning the ON/OFF switch
on the appliance off.
Remove the plug from the socket and disconnect the cord from the machine.
Put the cord on top. Fold the cloth on top of the housing.
If the cloth is damp as a result of the smoke liquid, it will first need to be rinsed and dried.
And finally, close the lid of the box.
www.FireWare.nl FireWare Phoenix Silkflame
Afbeelding 2
13