Operation; Cleaning And Maintenance; Disposal; Technical Data - MIA VLO 7010 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
O
p
e
r
a
t
i
o
n
O
p
e
r
a
t
i
o
n
Before connecting to the electricity be sure that the appliance is mounted completely
and all parts are fixed firmly.
Connect the appliance to a grounded mains socket. Be sure to place the appliance closed to a
socket and take care that the cord can never be a tripping hazard.
Operation by turning switch
Oscillation (swivel function):
The tilt angle of the guard can be changed into different levels (see picture on the left).
C
l
e
a
n
i
n
g
a
n
d
m
a
i
n
C
l
e
a
n
i
n
g
a
n
d
m
a
i
Caution danger of electric shock! Never immerse the appliance, powercord or plug into
water or any other liquid! Do not clean the appliance wet. Water and liquids intruding can
cause damage and short circuit.
When you clean the appliance it is necessary to switch off and pull the plug first.
Never clean the appliance during operation.
Use the appliance in dry rooms only - humidity can cause damage to electrical appliances.
Do not use sharp or scouring detergents. Wipe off the plastic parts with a slightly damp
cloth only.
For storage of the appliance, cover it against dust and store it in a dry place.
D
i
s
p
o
s
a
l
D
i
s
p
o
s
a
l
Please observe the environment! Dispose the packaging according to the local garbage
regulations. Dispose paper and carton separately from plastic bags into the corresponding
container. If at any time in the future, you should need to dispose of this product please note that
waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your local authority or retailer for
recycling advice. Dispose the appliance at the end of its lifespan according to
environmental considerations. (Waste Electrical and Electronic Equipment
Directive)
T
e
c
h
n
i
c
a
l
d
a
t
a
T
e
c
h
n
i
c
a
l
d
a
t
a
220-240V ~ 50Hz, 50 watts
This appliance is tested according to GS and corresponds to CE directives.
Turn the switch on the control panel:
Level 3 = high speed
Level 2 = medium level
Level 1 = low level
Level 0 = OFF (turns off the appliance).
The oscillation knob is placed behind the metal mesh guard on top of the motor
block. When pressing down the oscillation knob during operation, the guard
will oscillate (swivel).
When lifting the oscillation knob during operation, oscillation will stop.
t
e
n
a
n
c
e
n
t
e
n
a
n
c
e
13

Publicidad

Tabla de contenido
loading

Tabla de contenido