Marmitek Anywhere 400 Modo De Empleo página 4

CONTENT
1x Audio Transmitter
2x Wireless Speakers
1x Remote control (2xAAA batteries included)
3x Power adapters
1x RCA to RCA cable (Stereo) 2 meter
1x RCA to 3.5mm jack adapter
1x 3.5mm to 6.3mm jack adapter
1x User manual English, Deutsch, Français, Español, Italiano, Nederlands.
INSTALLATION
Transmitter
[1] RCA Stereo AUDIO input
[2] Power indication LED (green)
[3] Signal indication LED (blue)
[4] Channel switch
[5] Power connection
1. Plug the supplied AC power adapter in the Power connection [5].
2. Connect your audio source (i.e. TV, PC, Radio, CD-/MP3-/MP4-/DVD player) to the AUDIO
input [1] of the transmitter. The AUDIO output of your audio source is normally indicated
with or AUDIO OUT. If needed, you can use the supplied adapters.
3. Plug the power adapter in the electrical wall outlet and the Power LED [2] will light up. As
soon as the transmitter is receiving the audio signal, it will automatically switch on and the
Signal LED [3] will illuminate (blue).
4
"R- AUDIO IN -L"
" "
" "
"CH 1, 2, 3"
"DC IN"
© MARMITEK