PPA DOG Manual Tecnico

The electrick lock is a security item designed for gates. It can be
either activated on the moment the gate operator is activated, or
manually, by means of a key. It automatically locks the gate after
its closing.
DOG
The Timing board has been designed in order to decrease the ener-
gy consumption of the product.
ELECTRIC LOCK
INSTALLING THE PRODUCT
1. Carefully reald all the information contained herein before star-
ting the installation procedures.
2. The electric lock must be installed on the internal side of the gate.
The product mounting (fixing) depends on the type of gate. So,
the installer must choose the best manner of installing as well as
the best position for the product in each installation.
3. Fasten the base on the gate and use the bolt to center the ramp
(gate stopper).
4. Fasten the ramp and then fasten the lock with the screws.
5. Once the set is assembled, perform the testing, by manually ope-
ning and closing the gate.
Electrical connection for operators without the
lock connector on the board:
BLACK WIRE AND WHITE WIRE = 127V
BLACK WIRE AND RED WIRE = 220V
WARNING
Do not use the device
without referring to this
manual first.
The electrick lock is a security item designed for gates. It can be
either activated on the moment the gate operator is activated, or
manually, by means of a key. It automatically locks the gate after
its closing.
The Timing board has been designed in order to decrease the ener-
gy consumption of the product.
INSTALLING THE PRODUCT
1. Carefully reald all the information contained herein before star-
ting the installation procedures.
2. The electric lock must be installed on the internal side of the gate.
The product mounting (fixing) depends on the type of gate. So,
the installer must choose the best manner of installing as well as
the best position for the product in each installation.
3. Fasten the base on the gate and use the bolt to center the ramp
(gate stopper).
4. Fasten the ramp and then fasten the lock with the screws.
5. Once the set is assembled, perform the testing, by manually ope-
ning and closing the gate.
Electrical connection for operators without the
lock connector on the board:
BLACK WIRE AND WHITE WIRE = 127V
BLACK WIRE AND RED WIRE = 220V
TECHNICAL
MANUAL
TIMING BOARD
CLOSING
OPENING
COMMON
SINGLE-PHASE INDUCTION MOTOR
MONOFÁSICO
TIMING BOARD
CLOSING
OPENING
COMMON
SINGLE-PHASE INDUCTION MOTOR
MONOFÁSICO
Electrical connection for operators with the
lock connector on the board: lock connector on the board:
BLACK WIRE AND WHITE WIRE = 127V BLACK WIRE AND WHITE WIRE = 127V
BLACK WIRE AND RED WIRE = 220V BLACK WIRE AND RED WIRE = 220V
RELAY MODULE BY PPA*
127VAC
OR
LOCK CONNECTOR
220VAC
OPERATOR'S BOARD
according to the tension of
the purchased DOG lock
BLACK WIRE AND WHITE WIRE = 127V BLACK WIRE AND WHITE WIRE = 127V
BLACK WIRE AND RED WIRE = 220V
RELAY MODULE BY PPA*
127VAC
OR
220VAC
LOCK CONNECTOR
OPERATOR'S BOARD
according to the tension of
the purchased DOG lock
*On a variable frequency drive control unit with three-phase motor, use a Relay Module by PPA.
Electrical connection for operators with the
GENERAL TERMS AND CONDITIONS OF WARRANTY
lock connector on the board:
MOTOPPAR, Industry and Commerce of Automatic Gate Openers Ltd.,
Located at 3526 Dr. Labieno da Costa Machado Avenue, Industrial District,
Garça –SP, Zip Code 17400-000, National Registry of Legal Entities Number
52.605.821/0001-55, State Registration Number 315.011.558.113 hereby
guarantees this product against design, manufacturing or assembly defects
BLACK WIRE AND WHITE WIRE = 127V
and/or supportively as a result of material quality flaws that make its use
BLACK WIRE AND RED WIRE = 220V
improper or inadequate within a legal period of 90 (ninety) days from time of
acquisition, as long as installation instructions are followed as described in the
technical manual. In case of defect, within the warranty period, MOTOPPAR
liability is restricted to the repair or substitution of the product manufactured
by the company.
RELAY MODULE BY PPA*
Due to the credibility and trust placed on PPA products, we add 275 more
days to the period mentioned above, reaching a warranty period of one
year, likewise counted from the time of acquisition proven by the consumer
through a proof of purchase.
Within the additional period of 275 days, only visits and transportation
in places where authorized technical assistance is not available will be
127VAC
OR
charged. The cost of transportation of the product and/or technician will be
LOCK CONNECTOR
220VAC
responsibility of the consumer.
OPERATOR'S BOARD
according to the tension of
The substitution or repair of the product does not prolong this warranty.
the purchased DOG lock
This warranty will be terminated if the product:
- Is damaged by accidents or natural agents, such as lightning, floods,
landslides etc.;
- Its installation has an improper electric power supply or if it is not
BLACK WIRE AND WHITE WIRE = 127V
accordingly to any of the installation instructions from the manual;
BLACK WIRE AND RED WIRE = 220V
- Is not used for its intended purpose;
- Is not used under normal conditions;
- Is damaged by accessories or piece(s) of equipment connected to it.
Recommendation:
We recommend the operator installation to be carried out by an authorized
PPA technical service provider.
RELAY MODULE BY PPA*
Installation done by a third party will terminate the warranty due to damage
caused by inadequate installation. Only a PPA authorized technician is
qualified to open, remove and substitute parts or components, as well as
repair defects covered by this warranty. Failure on observing this guideline
and the verified use of any non-original parts will cause the resignation of
this warranty document on the part of the user. 127VAC
OR
If the product fails, seek an Authorized Technical Service to fix it.
LOCK CONNECTOR 220VAC
OPERATOR'S BOARD
according to the tension of
the purchased DOG lock
*On a variable frequency drive control unit with three-phase motor, use a Relay Module by PPA.
TIMING BOARD
TIMING BOARD
TIMING BOARD
TIMING BOARD