Ega Master 90188 Manual De Instrucciones página 5

1. Insert one vertical beam in one hole of the base beam until holes matches. Then fix with one screw
and nut.
2. Insert other vertical bean in opposite hole of the base frame. Before fixing, insert another base beam in
upper position. Fix upper base frame to both side beams.
Repeat same process for other columns.
3. Lay down the frame and assembly wheels.
4. Once the assembly is on the wheels, assembly the metal panels, inserting them into the vertical frames
connections.
Insert canopy supports in upper vertical beams holes.
5. Assembly EGA Master canopys with their supports.
6. place hooks in the holes of the metal panels in convenient position for placing the tools.
1
4
ASSEMBLY
2
5
6
3
5