Assembly - PRETUL MOG-65P Manual De Instrucciones

Assembly

Engine mount
• The motor must be attached to a plate (A) welded to the
structure or chassis of the machine where the engine will
be housed. This plate must be larger than the base of the
engine and have four perforations to fix the motor with
four sets of hexagonal bolts.
NOTE The motor must be mounted on a level
surface otherwise the motor may be damaged due to
improper lubrication.
D
C
B
Shaft junction
• The engine shaft can be attached to a steering wheel or
clutch depending on the purpose of the engine.
1. Remove the bolt (B) to remove the cover (C) that holds
the wedge (D) in place.
2. Place the steering wheel (E) or clutch on the motor
shaft not without first placing the key on the shaft to match
the steering wheel slot (F).
3. Secure the steering wheel on the shaft with the bolt (B).
1
A
2
E
F
3
7
ENGLISH