To increase or move peripherals, the work must be performed by a person physical-
ly present on site to enable completion of the practical installation procedures, bat-
tery insertion etc.
5 – MAINTENANCE
HSMO does not require special maintenance. The device is fitted with an internal
rechargeable buffer battery which is activated in the event of a power failure. The aver-
age lifetime of this battery is 4-7 years (decisive factors include environmental temper-
ature, frequency and intensity of use). It must be replaced at the end of this period.
Otherwise a practical test of system duration must be performed: disconnect the
mains power supply and check how long afterwards the low battery signal is activat-
ed. Replace the battery when the time is half that of the normal value or less than the
required service time.
If HSMO remains unused and not mains-powered for a period of over 2 days, at least
one internal battery pole must be disconnected and the unit must be stored in a cool
and dry location.
6 – DISPOSAL
As in installation, also at the end of product lifetime, the scrapping operations must
be performed by qualified personnel.
This product comprises various types of materials, some of which may be recycled
and others must be disposed of; seek information of the methods of recycling or dis-
posal as envisaged by local legislation for this product category.
Some product parts may contain pollutant or hazardous substances; if disposed of
these could harm the environment and personal health.
As indicated by the symbol in the figure, disposal of this product in
domestic waste is strictly prohibited.
Separate the waste into categories for disposal, according to the
methods envisaged by current legislation in your area, or return
the product to the retailer when purchasing a new version. Local
legislation may envisage serious fines in the event of abusive dis-
posal of this product.
10 – English