I
NSTALLLATION
Installlation
Television Location
Optional Cable Connection
AC Power Supply Cord
Cable / Antenna
4
This unit is intended to be used with an optional stand or entertainment
center. Consult your dealer for available options.
r
Avoid excessive sunlight or bright lights, including reflections.
r
Keep away from excessive heat or moisture. Inadequate ventilation
may cause internal component failure.
r
Fluorescent lighting may reduce Remote Control transmitting range.
r
Avoid magnetic equipment, including motors, fans, or external speakers.
CAUTION:
Use this television receiver only with the cart,
stand,
tripod,
bracket,
manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over. In order to avoid
injury to children, never place your television receiver on a
piece of furniture that is capable of being tilted by a child
leaning on it, pulling on it, standing on it, or climbing on it.
Shielded audio and video cables should be used between components. For
best results:
r
Use 75-ohm coaxial shielded cables.
r
Use appropriate input and output connectors that match your
component connectors.
r
Avoid long cables to minimize interference.
CAUTION:
TO
PREVENT
MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF
AC OUTLET AND FULLY INSERT. DO NOT USE A
PLUG WITH A RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADE CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER,
CRIMPED,
BENT
CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT
FROM THE APPARATUS.
For proper reception, either a cable or antenna connection is required.
Cable Connection
•
Connect the cable supplied by your
local cable company.
Note:
A cable converter box may be required for
proper reception. Check with your local
cable
requirements.
or
table
specified
ELECTRIC
OR
PINCHED,
company
for
by
the
SHOCK,
Polarized plug
PARTICULARLY
Incoming Cable from
Cable Company
compatibility
75 Ohm VHF/UHF
on back of TV
AT
PLUGS,