Picture In Picture (Pip) Operation; Pip Operation With A Vcr And Cable Box - Quasar SP3234 Instrucciones De Operación

Picture In Picture (PIP) Operation

PIP Operation with a VCR and Cable Box

TERMINALS ON BACK OF TV
TO AUDIO
ANT
AMP
INPUT
S-VIDEO
This television includes a Picture In Picture (PIP) feature. A second video
source (VCR, Camcorder, etc.) is required to provide a second picture.
Connect your television to a VCR and Cable Box, as shown.
AUDIO VIDEO
R L
2
1
CABLES NOT SUPPLIED
Note:
Procedure
Turn the VCR OFF and tune TV to channel 3.
Press the PIP button on the remote control to display the PIP frame.
Note:
To view a different picture in the PIP frame:
• Press the TV/VIDEO button on the remote control to select
the video PIP source.
• Verify the CABLE BOX and VCR are ON and the VCR tuned
to channel 3.
Choose channels for the PIP frame by pressing the CABLE
•
button on the remote control and using the numeric keypad
or CH up/down buttons.
• Choose channels for the Main Picture by pressing the TV
button on the remote control and using the numeric keypad
or CH up/down buttons.
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for on
screen PIP and Main Picture source status.
P I P
ICTURE N ICTURE
VCR
S-VIDEO OUT
ANT INPUT
VIDEO OUT
L
AUDIO OUT
R
The remote control must be programmed with supplied
codes to operate the VCR and Cable Box. See
Programming the Remote Control in the Remote
Control Quick Reference Guide.
The PIP picture is the same as the main picture, initially.
SWAP Button
(PIP) O
PERATION
CABLE BOX
ANT OUTPUT
Incoming
Cable
ANT INPUT
Cable Splitter
(Not Supplied)
7