Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MODEL: SST9032
GENERAL SAFETY RULES
UNPACKING
FEATURES
OPERATION
ADJUSTING THE EXHAUST
LOADING FASTENERS
UNLOADING FASTENERS
CLEARING JAMS
NON-MARRING PAD
SETTING THE AIR PRESSURE
FIRING THE TOOL
ORK CONTACT ELEMENT(WCE)
W
MAINTENANCE
RECOMMENDED HOOKUP
TROUBLESHOOTING
WEARING PARTS
WARRANTIES
WARNING:
The warnings and precautions discussed in the manual cannot cover all possible conditions and
situations that may occur. It must be understood by the user that common sense and caution are
factors which cannot be built into this product, but must be supplied by the user.
SAVE THIS MANUAL
Keep this manual for the safety warnings,
●
precautions, operations, inspections and
maintenance. Keep this manual and the
receipt in a safe and dry place for future
reference.
02
.
HTTP://WWW NUMAXTOOLS COM
P3
P6
P6
P7
P7
P8
P8
P8
P8
P9
P9
P10
P11
P11
P12
WARNING:
!
To avoid serious personal injury, do not
attempt to use this product until you read
the manual
thoroughly and understand it
completely . Save this manual and review
frequently for continuing safe operation
and instructing others who may use this
tool.
.
1-888-669-5672
MODEL:
SST
9032
SYMBOLS
●
In this manual, on the labels, packages and all other information provided with this tool. The following
signal words and meanings are intended to explain the levels of risk associated with this tool.
SYMBOLS
SIGNAL
MEANING
Indicates a potentially hazardous situation, which, if not avoided,
WARNING:
!
could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
CAUTION:
!
may result in minor or moderate injury.
(Without symbol) Indicates a situation that may result in
CAUTION:
property damage.
GENERAL SAFETY RULES
INSTRUCTIONS PERTAINING TO A RISK OF
FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS.
WARNING:
!
When using tools, basic precautions
should always be followed, including the
following:
CALIFORNIA PROPOSITION 65
WARNING:
!
This product or its power cord may
contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
WORK AREA
●
Keep the work area clean and well lighted.
Cluttered benches and dark areas increase the
risks of accidents.
●
Do not operate the tool in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust.
The tool
creates a spark which may ignite flammable
liquids, gases or dust.
●
Keep bystanders, children, and others away
while operating the tool.
Distractions could
result in improper use and cause injury.
●
Avoid unintentional misfires.
Always use
caution to avoid accidentally firing. Do not point
towards yourself or anyone whether it contains
fasteners or not.
.
HTTP://WWW NUMAXTOOLS COM
PERSONAL SAFETY
Do not nail on top of another nail.
This is
able to cause the nail to be deflected and hit
someone, or cause the tool to react and result in
a risk of injury to persons.
Remove finger from the trigger when not
driving fasteners.
Never carry the tool with
finger on trigger, the tool is able to fire a
fastener.
Always wear eye protection.
Operator and
others in the work area should always wear
ANSI-approved safety goggles with side
shields. Eye protection is used to guard against
flying fasteners and debris, which may cause
severe eye injury.
Always wear hearing protection when
using the tool.
Prolonged exposure to high
intensity noise may cause hearing loss.
Use safety equipment.
A dust mask, non-skid
safety shoes and a hard hat must be used for
the applicable conditions. Wear a full face shield
if you are producing metal filings or wood chips.
Dress properly. Do not wear loose clothing
or jewelry.
Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be
caught in moving parts.
Stay alert, watch what you are doing and
use common sense when operating a
power tool.
Do not use tool while tired or under
the influence of drugs, alcohol, or medication. A
moment of inattention while operating the tool
may cause serious injury.
Avoid unintentional firing. Keep fingers
away from trigger when not driving
fasteners, especially when connecting the
tool to the air supply.
Keep proper footing and balance at all times.
Proper footing and balance enables better
control of the tool in unexpected situations.
.
1-888-669-5672
03
Publicidad
Tabla de contenido
