Descargar Imprimir esta página

Safety Guidelines - Definitions; Important Safety Instructions - Stanley PCI109 Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

FEATURES
CARACTERÍSTICAS
1
2
4
7
FEATURES
1. Three-prong 120 volt AC outlets
2. On/off button with bi-color power/fault LED indicator
3 USB power port
4. Hang clip
5. Holes for mounting the hang clip
6. Hang clip release button
7. 12VDC accessory plug
8. Hang clip screws (2 pcs.) (not shown)
9. Hang clip double-side sponge sticker (not shown)
3
5
6
CARACTERÍSTICAS
1. Tomacorrientes de tres patas de CA de 120 voltios
2. Botón con./desc. con el indicador LED bicolor de potencia y fallas
3 Puerto de la energía USB
4. Ahorcar gancho
5. Agujeros para montar el ahorcar gancho
6. Botón de lanzamiento del ahorcar gancho
7. Enchufe del accesorio 12VDC
8. Tornillos del ahorcar gancho (2 pedazos) (no demostrados)
9. Etiqueta engomada del la esponja del doble-lado del clip del
ahorcar gancho (no demostrada)
2
GENERAL SAFETY WARNINGS AND INSTRUCTIONS
READ ALL INSTRUCTIONS
WARNING: Read all instructions before operating converter. Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury.
SAFETY GUIDELINES / DEFINITIONS
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage.
RISK OF UNSAFE OPERATION. When using tools or equipment, basic safety precautions should always be followed to reduce the risk of personal
injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and property damage. There are
certain applications for which tools and equipment are designed. Manufacturer strongly recommends that this product NOT be modified and/or
used for any application other than for which it was designed. Read and understand all warnings and operating instructions before using any tool
or equipment.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: This product or its power cord contains lead, a chemical known to the State of California to cause cancer and birth defect or other
reproductive harm. Wash hands after handling.
• Avoid dangerous environments. Don't use converters in damp or wet locations.
• Keep children away. Keep away from children. This is not a toy!
• Store indoors. When not in use, converters should be stored indoors in dry, and high or locked-up places – out of reach of children.
• DIsconnect the converter from the power supply when not in use.
• Proper cooling is essential when operating the converter. Do not place it near a vehicle' s heat vent or in direct sunlight.
• Use of accessories and attachments: The use of any accessory or attachment not recommended by manufacturer for use with this converter
could be hazardous.
• Stay alert. Use common sense. Do not operate converter when you are tired.
• Check for damaged parts. Any part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise
indicated elsewhere in this instruction manual before further use.
• Do not operate the converter near flammable liquids or in gaseous or explosive atmospheres. Motors in tools or appliances used with the
converter may spark, and the sparks might ignite fumes.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK:
• Never immerse the converter in water or any other liquid, or use when wet.
• Do not insert foreign objects into the converter' s outlets.
WARNING: TO REDUCE THE RISK OF FIRE:
• Do not operate near flammable materials, fumes or gases.
• Do not expose to extreme heat or flames.
• If the vehicle accessory outlet fuse opens (blows) when plugging in this converter, do not use this converter with this vehicle accessory outlet:
– Do not repeatedly replace the fuse.
– Do not replace the vehicle accessory outlet fuse with one of a higher amperage rating.
– Never attempt to patch the fuse with tin foil or wire.
Any of these actions may cause serious electrical damage and/or a fire.
This converter is rated to draw 9.5 amperes from a 12V vehicle outlet. Ensure that the engine system in your vehicle can supply sufficient energy to
the converter without causing the vehicle accessory outlet fuse to open.
The fuse must be rated higher than 12 amps. Information on the vehicle accessory fuse ratings are typically found in the vehicle operator' s manual.
CAUTION: TO REDUCE THE RISK OF INJURY OR PROPERTY DAMAGE:
• IT IS NOT NECESSARY (OR DESIRABLE) TO TURN YOUR VEHICLE ON TO OPERATE THIS CONVERTER. Simply turn the engine switch to the accessory
position (usually the second position, just before "engine start"). Or turn on the running lights (the small lights that surround the car). This is
generally the first button on the light switch, depending on the make of vehicle.
• If the converter shuts down repeatedly, the car battery charge may be low. Discontinue converter use to avoid draining the battery.
• Disconnect appliance plug from converter outlet before working on the appliance.
• Do not attempt to connect or set up the converter or its components while operating your vehicle. Not paying attention to the road may result in
a serious accident.
• Always use the converter where there is adequate ventilation. Do not block ventilation slots.
3

Publicidad

loading