Safety Guidelines - Definitions; Important Safety Instructions - Stanley PC809 Manual De Instruccion

FEATURES
CARACTERÍSTICAS
6
4
6
5
FEATURES
1. Ventilation slots
2. LCD Display
3. AC On/Off button
4 USB power port
5. Mounting brackets (total of 4, 2 in front, 2 in back)
6. Three-prong 120 volt AC outlets
7. Red (positive) cable post
8. High-speed cooling fan
9. Black (negative) cable post
10. Battery clips with cables and "O"ring connectors
7
8
9
1
2
3
4
CARACTERÍSTICAS
1. Ranuras de ventilación
2. Pantalla del LCD
3. Botón con./desc. (on/off) de CA
4 Puerto de la energía USB
5. Consolas de montaje (total de 4, 2 en frente, adentro parte
posterior 2)
6. Tomacorrientes de tres patas de CA de 120 voltios
7. Poste del cable rojo (positivo)
8. Ventilador de enfriamiento de alta velocidad
9. Poste del cable negro (negativo)
10. Clips de la batería con los cables y los conectadores del anillo
de "O"
2
GENERAL SAFETY WARNINGS AND INSTRUCTIONS
READ ALL INSTRUCTIONS
WARNING: Read all instructions before operating converter. Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury.
SAFETY GUIDELINES / DEFINITIONS
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage.
RISK OF UNSAFE OPERATION. When using tools or equipment, basic safety precautions should always be followed to reduce the risk of personal
injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and property damage. There are
certain applications for which tools and equipment are designed. Manufacturer strongly recommends that this product NOT be modified and/or
used for any application other than for which it was designed. Read and understand all warnings and operating instructions before using any tool
or equipment.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: This product or its power cord contains lead, a chemical known to the State of California to cause cancer and birth defect or other
reproductive harm. Wash hands after handling.
• Avoid dangerous environments. Don't use converters in damp or wet locations.
• Keep children away. Keep away from children. This is not a toy!
• Store indoors. When not in use, converters should be stored indoors in dry, and high or locked-up places – out of reach of children.
• DIsconnect the converter from the power supply when not in use.
• Proper cooling is essential when operating the converter. Do not place it near a vehicle' s heat vent or in direct sunlight.
• Use of accessories and attachments: The use of any accessory or attachment not recommended by manufacturer for use with this converter
could be hazardous.
• Stay alert. Use common sense. Do not operate converter when you are tired.
• Check for damaged parts. Any part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise
indicated elsewhere in this instruction manual before further use.
• Do not operate the converter near flammable liquids or in gaseous or explosive atmospheres. Motors in tools or appliances used with the
converter may spark, and the sparks might ignite fumes.
SPECIFIC SAFETY INSTRUCTIONS FOR CONVERTERS
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK:
• Do not connect to AC distribution wiring.
• Do not make any electrical connections or disconnections in areas designated as IGNITION PROTECTED. This converter is NOT approved for ignition
protected areas.
• Never immerse the converter in water or any other liquid, or use when wet.
• Do not insert foreign objects into the converter' s outlets.
WARNING: TO REDUCE THE RISK OF FIRE:
10
• Do not operate near flammable materials, fumes or gases.
• Do not expose to extreme heat or flames.
CAUTION: TO REDUCE THE RISK OF INJURY OR PROPERTY DAMAGE:
• Disconnect appliance plug from converter outlet before working on the appliance.
• Always use the converter where there is adequate ventilation. Do not block ventilation slots.
• Always turn the converter off and disconnect it from the power source when not in use.
• The converter must be connected only to batteries with a nominal output voltage of 12 volts. The unit will not operate from a 6 volt battery and
will sustain permanent damage if connected to a 24 volt battery.
• When using this unit in a vehicle, check the vehicle owner' s manual for maximum power rating and recommended output. Do not install in
engine compartment — install in a well ventilated area.
• Do not use with positive ground electrical systems.* Reverse polarity connection will result in a blown fuse and may cause permanent damage to
the converter and will void warranty.
*The majority of modern automobiles, RVs and trucks are negative ground.
• Keep in mind that this converter will not operate high wattage appliances or equipment that produce heat, such as hair dryers, microwave ovens
and toasters.
3