Philips SRP2024A/27 Manual De Usuario página 7

DVD
AUD
EXIT
Programming Your Remote
A B
1
CH
4
7
SLEEP
(-)
SETUP
MENU
you circled for that device.
6. Repeat Steps 1 – 5 for each device you wish
to control.
Programming Notes
• Some codes may operate only a few functions
of your device. There may be another code in
the Code List that controls more functions.
Test other codes in the Code List for more
functionality.
• If you do not find a remote code that works your
device or there are no codes in the Code List for
your device, use the Auto Code Search method
D
in the next section to program your remote.
• For combination devices such as a TV/DVD
combo or TV/VCR combo, you may have to enter
3
a code for each device. (See Controlling Combo
Devices.)
6
• Write down the remote codes used to program
the remote for future reference.
9
NTER
C D
Code List.
2 3
4. Use the number buttons on the
5 6
remote to enter the first 4-digit
8 9
remote code you circled in the Code
0
ENTER
List in Step 1. The red light will turn
off after entering the fourth digit.
5. Point the remote at the device.
Test the buttons on the remote to
see if the device responds as you
would expect. If the buttons do not
operate the device, return to Step
2 above and use the next code that
7