Springer RQ Serie Manual Del Usuario E Instalación página 12

convenient temperature, you can change the settings by
+
using the
TEMP.
AQUEC.
The (HEAT) mode is only available on units that operate
both on cooling and heating.
The activation of this mode will be acknowledged by a red LED on
the electronic panel.
REFRIG.
On (COOL) mode the equipment will lower the selected
temperature between 18 (64F) and 29 ºC (84F). When switching
the OPERATION MODE to
will assume the last selected temperature. If this is not the convenient
temperature, you can change the settings by using the
TEMP.
keys. The activation of this mode will be acknowledged by
_
an orange LED on the electronic panel.
VENT.
On (FAN) mode, the equipment circulates the air by using
the fan only, with no temperature change. The activation of this
mode will be acknowledged by a green LED on the electronic panel.
AUTO
The mode keeps the temperature constant as monitored
by the electronic controller, automatically switching between COOL-
ING and HEATING and alsochanging the speed as necessary.
AUTO
When switching to
last selected temperature. If this is not the convenient temperature,
you can change the settings by using the
Once the electronic controller has selected an operation mode, it
won't be changed in less than 30 minutes since the last mode
switch, even if it is necessary, in order to protect the equipment.
AUTO
The option is only available on units that operate both on
cooling and heating.
The activation of this mode will be acknowledged simultaneously
by an orange LED and a red LED on the electronic panel.
By pressing the TEMP keys, you perform the ppropriate
TEMPERATURE SETTING for your convenience.
+
The key raises the temperature. The
+
TEMP.
TEMP.
TEMP.
-
12
TEMP.
or keys.
-
REFRIG.
, (COOL) the electronic controller
the electronic controller will assume the
+
TEMP.
+
or
TEMP.
TEMP.
or keys.
_
TEMP. key
_