Quick QCC-LCS TS Manual De Instalacion Y Uso página 22

OPERATION
EN
RGBW ZONE MANAGEMENT PAGE
Description of page and functions
Name of the light room
where the QCC-LCS TS
is installed
(e.g. MAIN SALOON).
Cancel button
F
Colour bar - it appears only on the RGBW zone management page
It allows selecting the preferred colour by mixing RGB light sources.
Dimmer bar - light intensity bar
It allows increasing or decreasing the zone light intensity.
White button - it appears only on the RGBW zone management page
It allows switching ON only the white channel of the RGBW source.
Sync button - allows synchronizing all the zones with the same type of light source.
For example, if there are 3 RGBW zones and 2 single-colour zones, pressing the Sync button will synchronize the 3 zones
with the RGBW source, while the 2 single-colour zones will remain independent and can be managed from the zone ma-
nagement page.
Play button - it appears only on the RGBW zone management page
It allows activating an automatic colour change with continuous cycle.
Confirmation button - to confirm changes in the zone management page. After confirmation, the display returns to the
command home page.
Cancel button - to cancel changes in the zone management page. After cancellation, the display returns to the command
home page.
F
NOTE
: if you do not operate the management page for more than 5 seconds, any changes made will be automati-
cally canceled and the display will return to the command home page.
MAIN SALOON
RGB
Dimmer
White
White button
The selected buttons will have a green frame.
Sync Play
Play button
Sync button
22
QCC-LCS TS - REV001A
Colour bar
Dimmer bar
OK
Confirmation button
QUICK SPA