Wireless Subwoofer Operation; Wired Subwoofer Operation - Paradigm soundtrack Manual Del Operador

Status LED. Indicates connection status between the subwoofer
1
and soundbar (e.g. Not Paired, Searching for Connection, Paired).
For additional information refer to the Set-Up Guide.
Line-Level Input (for use in a wired subwoofer connection only)
2
Allows connection from the wired Sub Out of the soundbar or Sub/
LFE Out of an external A/V receiver, processor or other suitable low-
level source. IMPORTANT: Do not connect a cable to the Line-Level
Input if you have already set-up a wireless subwoofer connection.
Pair. This feature initiates wireless pairing between the subwoofer
3
and the soundbar's transmitter inside the soundbar.
Subwoofer Level. Balances the subwoofer's output level to that of
4
the soundbar. See Set-Up Guide for more information.
WIRELESS OPERATION
Transmitter Range
In a typical listening room the built-in wireless transmitter in your
soundbar has a maximum range of 50' (15 m). Obstructions such as
walls, large pieces of furniture, room dividers, etc., may reduce that
range. Do not place the soundbar and subwoofer farther apart than
the recommended range.
The soundbar's wireless transmitter features a 2.4 GHz uncompressed
digital self-sensing design that will automatically adjust for the best
wireless connection while monitoring the integrity of the data stream.
See Set-Up Guide for synching instructions.
WIRED OPERATION
Subwoofer Soundbar
Back Panel Back Panel
Use the Line-Level Input From
Sub/LFE Out on sound bar.
Using an RCA-to-RCA interconnect
cable connect the subwoofer
as shown.
8