Operation
Hot water
90°
Push the outer ring inward
and turn it back 90°.
Start-stop and auto-stop:
If desired: set the amount of
hot water in millilitres.
The automatic fl ow of water can be stopped at any time by
touching the side sensor.
CAUTION! To prevent water damage, ensure that the water outlet is
always positioned over the bowl.
Pull the outer ring
outward again.
<1
Touch the side sensor for
less than 1 sec. to dispense
the selected amount of
hot water.
8
Hot water mode
is active for 8 seconds.
>1
Start-stop: Touch the side sensor
for more than 1 sec. to dispense
hot water. Stopping contact stops
the water.
35