Technical Characteristics - EYEON 160306 Manual De Instrucciones

The recognizer 160 306 is used to activate the services within the
EN
chamber by means of a transponder card.
With the recognizer is not reading the card, it is, however, guaranteed the
recognition of any type of card chip card and time of disarming courtesy
of the card.
The recognizer for activation is installed inside the room next to the
entrance for easy identification by the customer.
FEATURES
- ENABLING SERVICES ROOM RECOGNITION CARD CHIP CARD
- LED FLASHES WHEN THE CHIP CARD IS NOT INSERTED AND FIXED TO THE INCLUSION
- FEATURES BOTH ONLINE AND IN LOCAL
- THE CONNECTORS FOR DATA TRANSMISSION ARE PULL-OUT (RJ 11)
- RELAY 5A-230V WITH DIRECT DRIVE FOR OPENINGS OR ACTIVATIONS.
- SETTING TIME COURTESY DISABLING OF THE ROOM.
Power supply voltage
Total absorption
Output flow (cos= 1) cat AC1
protection
Approvals
Operating temperature
Storage temperature
Relative air humidity

TECHNICAL CHARACTERISTICS

24Vdc (from the control room)
30 mA
3A – 230 Vac
IP 30
CE
0° to 50°C
-10° to +70°C
5 to 95% with no condensation