Operation Mode - Cablematic OPTIMA-T09W-06K-230V Manual De Usuario

OPERATION MODES LCD SCREENS (230VAC)
LCD screens for 120V UPS models are similar but showing values related to 120V instead of 230V

OPERATION MODE

STANDBY
ONLINE
BATTERY MODE
BYPASS MODE
FREQUENCY CONVERTER
MODE
ERROR/FAILURE MODE
DESCRIPTION
A- When bypass is not allowed UPS output is
powered-off (0V). It happens when UPS
detects a valid input voltage but ON button
has not been pressed.
B- Flow chart indicates AC input is used to
recharge batteries only.
A – In online mode, Input voltage indicates a
valid AC input close to (232VAC).
B – Output voltage is displayed in upper left
corner (B)
C – Flowchart indicates AC input is used to
recharge batteries but also feeds rectifier
input. UPS output is generated by inverter.
A- Input indicator at bottom left corner (A)
shows Battery voltage since there is no valid
AC input detected.
B- Output indicator displays AC output
generated by UPS inverter.
C- AC input symbol must be turned off
representing there is no valid AC input
detected by UPS.
D- Clock symbol lights and backup time is
displayed on the screen.
A- Input and output indicators must show a
similar value since output is been feed by
input through static internal bypass line.
B- Flowchart shows static bypass line is
active. Converters icon is turned off
representing inverter is OFF.
A- FC CONVERTER symbol is activated to
indicate FC conversion mode is active.
A- When a failure is detected, UPS display
error code with alert symbol on screen.
VER.1801.25-WP+ (ENG)
USER MANUAL - OPTIMA T09W 6K/10K
LCD
15