Application; Technical Data - Force PT110921 Manual De Operador

APPLICATION

WARNING!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Intended Use
The 4. 5" angle grinder is intended for cutting, roughing and brushing metal
and stone materials without using water. For cutting stone, a cutting guide is
required.
Check the delivery parts
Carefully remove the tool from its packaging and check if the following parts are
complete:
• 4.5 Angle grinder
• Auxiliary handle
• Retainer mounting flange and clamp nut
• Two-pin spanner wrench
If any parts are missing or damaged, please contact Customer Service at the
number indicated on the front page of this Manual.
Product Features
The numbering of the product features refers to the illustration of the tool on the
graphics page.
1. On/Off switch
2. Auxiliary handle
3. Spindle lock
4. Spindle collar
5. Spindle
6. Guard release/Lock screw
7. Wheel guard
8. Retainer mounting flange
9. Grinding Wheels/Cutting Discs
10. Clamp nut

TECHNICAL DATA

Angle grinder
Voltage rating
Current rating
No-load speed
Spindle thread
Max. disc diameter
PT110921
120 V AC / 60 Hz
7.5 amp
11,000 RPM
5/8" (16 mm)
4.5" (115 mm)
11