TMI Products VD33 Manual De Operación página 3

* Before setting the date, be sure to set the time.
1) Pull out the crown to the first click.
2) Turn the crown clockwise until the desired date appears.
3) Push the crown back in the normal position.
Note :
* Do not set the date during any time between 9:00 P.M. and 1:00 A.M. Otherwise, the date may not
change properly. If it is necessary to set the date during that time period, first change the time to any
time outside it, set the date and then reset the correct time.
Operation Manual
VD33 / VD34
DATE SETTING (VD33 only)
English