Cleaning And Maintenance - Sienna Birdie SSC-0316 Manual De Instrucciones

Connecting squeegee (M):
7) Connect the squeegee to the steam head (J) by aligning and connecting the tabs located at the
bottom of the squeegee (M) with the bottom of the steam head (J). Press and snap in place.
WARNING: ON SURFACES THAT HAVE BEEN TREATED WITH WAX, THE WAX MAY BE
REMOVED BY THE HEAT AND STEAM ACTION. DO NOT USE ON UNSEALED WOOD FLOORS
OR LET UNIT STAND ON ANY WOOD FLOOR FOR AN EXTENDED PERIOD OF TIME. THIS MAY
CAUSE THE WOOD GRAIN TO RISE. IT IS RECOMMENDED THAT A SECTION BE TESTED IN AN
ISOLATED AREA OF THE FLOOR. IT IS ALSO RECOMMENDED THAT YOU CHECK THE USE AND
CARE INSTRUCTIONS FOR CLEANING FROM THE FLOOR MANUFACTURER TO ENSURE STEAM
CLEANING IS ACCEPTABLE FOR YOUR WAXED SURFACE.
CAUTION: Prior to cleaning or maintaining your steamer, isolate the unit by unplugging
the power cord from the outlet and avoid immersing the unit in water.
1) The microfiber cloth pad can be machine washed in hot water and tumble dry. Do not use
bleach or fabric softener. Allow to dry fully before use.
2) Wipe steamer with soft cloth when/if necessary.
Product Specs:
Voltage supply: 120 V, 60 Hz
Output: 1500 W
Water tank capacity: max. 6.8 fl oz.
Cord: 16.4 ft.
Weight: 2.3lbs.
Protection class: 2

CLEANING AND MAINTENANCE

8