Safety Instructions - Krüger & Matz KM1301 Manual Del Propietário

SAfety inStRUCtiOnS

Read the entire instruction manual before you start installation and assembly and keep it
for future reference.
CAUtiOn: Never exceed the maximum load capacity! Using with products heavier than the
rated weights indicated may cause damage/injury.
• Mounts must be attached as specified in this manual. Improper installation may result
in damage or serious personal injury. Producer does not claim liability for any damages/
injuries caused by inappropriate installation. Use only for the purpose intended.
• Do not alter the structure of the product. Any modifications implemented by user in the
product pose risk of injury or damage and void warranty!
• Safety gear and proper tools must be used. This product should be installed by qualified
professional with proper mechanical skills and acknowledged with the building's
structure and this instruction manual.
• When installing the device on the bracket, it is recommended to use the help of a second
person.
• This product is designed to be installed only on wood stud walls, solid concrete walls or
brick walls. In case of mounting on wood stud wall, make sure that mounting screws are
anchored into the center of the studs.
• Make sure that the supporting surface will safely support the combined weight of the
mount, equipment and all attached hardware and components.
• Use the mounting screws provided. DO NOT OVER TIGHTEN mounting screws, as this
may lead to damaging the screw thread.
• Before installation, make sure the device, that will be installed on the bracket, is suitable
for hanging on a mount.
• All cables of the device should be routed so that they are secured from being pinched
or squeezed by the mount.
• Pay attention not to damage electrical/plumbing installation in the wall when drilling
and mounting screws.
• This product contains small items that could be a choking hazard if swallowed - keep
away from children, this product is not a toy.
• For indoor use only.
• Ensure that you have received all parts according to the component checklist prior to
installation. If any parts are missing or faulty, contact your distributor for a replacement.
MAintenAnCe: After installation, make sure the bracket is firmly mounted. At regular
intervals, at least every three months, check that the bracket is secure and safe to use.
english
Correct Disposal of this product
(Waste electrical & electronic equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with
other household wastes at the end of its working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.
10
Owner's manual