Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

PCUSB11 – USB 2.0 HUB MULTICARD READER/WRITER, 21 CARD TYPES, HIGH SPEED USB + LIGHT
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the PCUSB11! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
The PCUSB11 contains: USB 2.0 HUB and this manual.
Its features are:
• Fully compliant with USB 2.0 specifications and compatible with USB 1.1
• Compliant with EHCI/UHCI/OHCI
• Hi-speed USB 2.0, data transfer rate up to 480 Mbps
• Low power consumption
• 5 LED indicators to indicate POWER ON, USB port 1-4 connected
• Display for company name or logo with blue EL backlight
• Compatible with Win98SE/ME/2000/XP & Mac OS X
• Plug & Play/Hot Swap
2. Specifications
• Bus-powered or through optional adapter
• Lightweight miniature model
• Operating temperature: 0°C to 70°C
• Dimensions: 85 x 35 x 14mm
• Weight: 55g
1. Power
2. Ports 1-4
3. Port 1
4. Port 2
5. Port 3
6. Port 4
7. Power
3. System Requirements
• Pentium II 300MHz or higher including USB 1.1 or USB 2.0 port
• Windows 98SE/Windows 2000/Windows ME/Windows XP/Mac OS X
• CD ROM 24x or higher
ATTENTION: Keep the PCUSB11 out of the sun and away from high current electronic devices.
Do not disassemble or repair the PCUSB11. Contact your retailer if assistance is needed.
PCUSB11
1
VELLEMAN

Publicidad

loading

Resumen de contenidos para Velleman PCUSB11

  • Página 1 If in doubt, contact your local waste disposal authorities. Thank you for buying the PCUSB11! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, don't install or use it and contact your dealer.
  • Página 2 3. If you are running high power consumption USB devices, use DC power (5V/2A) for extra power supply. The information in this manual is subject to change without prior notice. PCUSB11 – USB 2.0 HUB MULTICARD READER/WRITER, 21 KAARTTYPES, HIGH SPEED USB + LICHT 1. Inleiding & kenmerken...
  • Página 3: De Software Installeren

    OPGELET: Houd de PCUSB11 uit direct zonlicht en uit de buurt van toestellen met een hoge stroomsterkte. Herstel of neem de PCUSB11 niet uit elkaar. Neem contact op met uw verdeler wanneer u hulp nodig heeft. 4. De software installeren Deze richtlijnen helpen u bij het installeren van de software voor Windows2000/ME/XP.
  • Página 4: Exigences Du Système

    • CD ROM 24x ou plus ATTENTION: Tenez le PCUSB11 hors de la lumière du soleil et à l’écart des appareils à forte intensité de courant. Ne réparez ou ne démontez pas le PCUSB11. Prenez contact avec votre revendeur en cas de difficultés.
  • Página 5: Introducción & Características

    • Windows 98SE/Windows 2000/Windows ME/Windows XP/Mac OS X • CD ROM 24x o superior ¡OJO!: Mantenga el PCUSB11 lejos del alcance de la luz solar y los aparatos con fuerte intensidad de corriente. No repare ni desmonte el PCUSB11. Contacte con su distribuidor en caso de dificultades.
  • Página 6: Instalar El Software

    3. Utilice un adaptador CC (5V/2A) como alimentación adicional al utilizar aparatos USB con alto consumo. Se pueden modificar las especificaciones y el contenido de este manual sin previo aviso. PCUSB11 – USB 2.0 HUB MULTI-KARTENLESER/-SCHREIBER, 21 KARTENTYPEN, USB MIT HOHER GESCHWINDIGKEIT + LICHT 1.
  • Página 7: Systemanforderungen

    • CD-ROM 24x oder höher ACHTUNG: Den PCUSB11 keinem direkten Sonnenlicht und keiner hohen Stromstärke aussetzen. Reparieren oder demontieren Sie den PCUSB11 nicht. Wenden Sie sich an Ihren Händler wenn Sie Hilfe brauchen. 4. Die Software installieren Diese Richtlinien helfen Ihnen bei der Installation der Software für Windows2000/ME/XP. Wenn Sie ein Win98SE Betriebssystem haben, legen Sie die CD-ROM ein und befolgen Sie die Anweisungen auf dem Schirm.