Hunter Argenus 30580 Manual Del Usuario página 11

Resetting the Air Sterilizer
In addition to the Pre-Filter and Main Filter Indicators, the Air Sterilizer has a red LED
Fault Indicator. See Figure 11.
Should the Fault Indicator ever come on, reset the Air Sterilizer.
1. Turn off the Air Sterilizer.
2. Unplug the unit for 5 seconds.
3. Check the Pre-Filter and the Main Filter for excessive dirt accumulation. (Refer
to Cleaning the Pre-Filter and Changing the Main Filter, pg. 7)
3. Plug the unit in, and turn it on.
4. If the Fault Indicator is still on, contact Hunter Fan Technical Support at
830-1326, or contact us over the internet at www.hunterfan.com.
Air Sterilizer Maintenance
Fault Indicator
Fig. 11 - Fault Indicator
11
1-888-
43006-01