QIMMIQ VR 360 Manual De Usuario página 19

3. Charging
Use data cable included in the product pack for camera charging. During charging,
the indicator displays in blue and lights constantly; when charging completed, the
blue indicator goes out.
Important:

If other charger is used, check the output power before use to ensure it
within 5V/0.5A ~ 5V/2.0A.
4. Recording or shooting
This camera has Recording mode and Shooting mode. After power-on, press MODE
(Power button) to switch between different modes, and the corresponding mode
icon will be displayed on the screen.
Video: In Recording mode, press Shutter button, and the camera get started to
work. The display screen displays the video recording timing.
Stop recording: During recording, press Shutter button to stop it. The video will
automatically be saved on your camera storage card. At that moment, the display
screen will show remaining time available for recording as below:
Shooting: In Shooting mode, press Shooting button to take photos. After shooting,
the display screen will display the number (estimated value) of pictures the
available space on you camera storage card can save.