Throttle Cable; Battery - CLIPIC Mini Rex 50cc Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Maintenance
1

THROTTLE CABLE

Inspect throttle cable condition and operation.
Replace the cable if it has become worn or kinked.
Lebricate the cable with lubricant to prevent premature wear
or corrosion. Adjustment can be made with the adjuster be-
side the throttle lever.
Loosen the lock nut and turn the adjuster. The free play
Adjusting
1.
should be maintained at 5-l0mm (1.97"-3.94").

BATTERY

When reinstalling the battery, be sure to connect the red
cable to the positive (+) lead and the black cable to the ne-
gative (-) lead.
When the battery no longer can hold a charge, replace it.
The battery should be replaced erery three years as a nor-
mal service.
Check the level of battery fluid and see if the terminals are
tight.
Add distilled water if the fluid level is low.
The level should be between the upper and lower level marks.
61

Publicidad

Capítulos

Tabla de contenido
loading

Productos relacionados para CLIPIC Mini Rex 50cc

Tabla de contenido