Installing And Using Your Q90D; Setting Up Your Q90D; Placing Tty Calls - Ameriphone Q90D Guía Rápida

Installing and Using Your Q90D

Setting Up Your Q90D

Lock Switch
1. Slide the LOCK switch (which is
located on the right side of the
unit below the ESC key) to the
OFF position before using your
Q90D.
2. Slide the LOCK switch to the ON
position before moving the Q90D
to another location.
Turning the Q90D ON and
OFF
1. To turn ON the Q90D, press the
Power key.
2. To turn OFF the Q90D, hold
down CTRL and press Power
again.

Placing TTY Calls

Dialing Manually from the
Q90D Keyboard
1. Turn ON the Q90D.
2. Press F1 and type in a phone
number.
3. Press Return and after the call is
answered, start typing.
4. To turn OFF the Q90D, hold
down CTRL and press Power.
To hang up and make another call,
hold down CTRL and press F1
instead.
Dialing from the Q90D
Phone Directory
1. Turn ON the Q90D.
2. Press F1 to enter DIAL mode.
3. Type the name of the person you
are calling or press one of the
Arrow keys until the desired
name appears.
4. Press Return to DIAL the name
that you have selected.
5. After the call is answered,
start typing.
6. To turn OFF the Q90D, hold
down CTRL and press Power.
To hang up, hold down CTRL and
press F1 instead.
Dialing from a Digital
Cellular or Cordless
Telephone
1. Connect the cell or cordless
phone to the Q90D using the
phone cord.
2. Turn ON the Q90D.
3. DIAL the telephone number using
the cellular or cordless telephone.
4. When the call is answered, start
typing.
5. To turn OFF the Q90D, hold
down CTRL and press Power.