Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Side panel
7
These ¼in microphone inputs will be used to connect a wired
microphone, which will work in all modes.
7.
Mic. 1 and Mic. 2
Note: a wireless microphone is provided with this unit.
If a wired or wireless microphone is used, turn these knobs to
8.
Mic. 1 / Mic. 2
adjust the corresponding microphone volume in all modes.
volume knob
Use this button to enable the reverberation effect of the
microphone.
9.
Echo knob
Allows music playback from a USB storage device.
10.
USB port
Back panel
11
11. Antenna
12. Aux. input
12
13. DVD input
13
14. Audio output
14
15
15. Light
8
9
10
Pick ups radio frequencies for the tuner.
Use this input to connect any external
audio or video devices fitted with a
3.5mm stereo output.
Use this input to connect the audio cable
for any input source.
Use this output to connect the second
satellite speaker.
Activates the illumination effect of the
(3.5mm jack)
second satellite speaker.
Remote control
Control
Press and hold this button to put the unit into Stand By mode. Press it again
1.
Power
to turn the Stand By function OFF. This applies to all modes.
Increases or decreases the treble (high) frequencies of the speaker.
2.
Treble button
Press this button to increase the master volume.
3.
Volume +
Takes you back to the previous track on your play list when using any of the modes.
4.
Press this button to decrease the master volume.
5.
Volume -
Press any of these buttons to select the corresponding input mode.
6.
AUX.
7.
BT
8.
DVD
Press any key from 0 to 9 on the remote control to choose directly the tracks
9.
Numbered keypad
you want to play. In tuner mode, it allows the manual input of frequencies or
the selection of any of the previously stored channels.
Press this button to select the different LED effects from LED1, LED2, LED3,
10.
LED button
LED4, LED5, LED6, LEDF (OFF).
Cancels the audio coming from the speaker. Press it again to unmute
11.
Mute button
the speaker.
12.
Bass button
Increases or decreases the bass (low) frequencies of the speaker.
In USB and Bluetooth
13.
mode, press and hold this button to scan radio stations automatically.
Press this button to play the next song or track on your play list in
14.
the USB and Bluetooth
Press these buttons to select the corresponding input mode.
15.
USB
16.
FM
This light will flash one time indicating that one of the buttons is being used.
17.
Indicator light
2
3
4
5
6
7
8
9
Description
modes press it briefly to play or pause media. In FM
®
modes.
®
17
10
11
12
13
14
15
16
Publicidad
Tabla de contenido
