Descargar Imprimir esta página

Genius TRF Serie Manual Del Usuario página 22

Ocultar thumbs Ver también para TRF Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

Connector 1 of 6 Cables
Black / White
White
Blue
Brown
Orange
Green / White
Connector 2 of 6 Cables
White / Red
Gray
Red
Black
Yellow
White
Connector 3 of 8 Cables
Purple
Green
Blue
Blue / white
Green / White
Orange
White
Pink
Blue connector of 2 cables
LED of the board
Red connector of 2 Cables
Button reset (Valet)
Side connector of 3 pines
Connector for optional sensors of 3 pines, Volumetric Sensor, Etc.
Side connector of 4 Pines
Connector For optional sensors of 2 zone, Microway, Etc.
Side connector of 5 Pines
Interface for module GSM
Adjustment of the sensibility of the sensor of impact
The adjustment of the sensibility of the sensor of impact in sense of the manacles of the clock.
More sensitivity Clockwise, Counterclockwise lower sensitivity
Configuration cables OEM (Arming / Disarming)
Mode B: This mode uses up to 4 cables for locking the vehicle doors, to determine the status of the
system. Two cables (PINK WHITE for lock and unlocking are connected to the driver's door).
When the doors are locked with factory original transmitter, the system will arm. When the doors
are unlocked with factory original transmitter, the system is disarmed. The wire GREEN / WHITE
(for the lock button) and cable BLUE / WHITE (for the unlock button) should be connected to one
of the wires from the button lock / unlock the driver's door. These cables are important because
they stop the system from arming / disarming when the door is locked or unlocked manually
22
Genius Car Alarm
Genius Car Alarms
Positive input of the pedal of the brake
Positive input Ignition (Acc). (+15)
Line of Push buttons of Doors (Negative)
Push button of the Trunk (Negative)
Push button of the Hood (Negative)
Input emergency Lights (Positive)
Negative output For the Horn
Positive output for the Siren
Input of Positive Current (+30)
Negative Current input (Chassis)
Negative output of 250 mA for the Cut Engine
Positive output for the lights Blink
Negative output of 30 seconds for module windows up
Lock Doors (-)
Unlock Doors (-)
Input (-) Unlock switch
Input (-) Lock switch
Input (+) Light OEM (when lock and unlock by remote)
Input (+) Lock For Arming
Input (+) Unlock for Disarming
www.alarmasgenius.com
www.geniuscaralarm.com
.
9

Publicidad

loading