Safety Instructions - TUV Rheinland ITC1510 Instrucciones De Instalación Y Funcionamiento

Safety Instructions

This device is manufactured in compliance with safety
regulations. Usage against the roles causes harm to person and
device.
Please read the User Manual carefully before operating the
device. You will find important information inside the User
Manual regarding mounting, safety, usage and maintenance.
Thus you will both protect yourself and prevent the device from
coming to harm.
If the power cord is damaged, it must be replaced by the
manufacturer or its service agency or a personnel qualified in
the same degree to prevent a dangerous situation. It must be
checked whether there are breaks or deformations on the
heating element present on the device. If glass panels are
damaged, the heater must not be used. Authorized service must
be called.
It must be ensured that the main power is 120 V AC, 60 Hz
and the power line is connected to the fuse. Mains safety must
be checked. Fuse must be 16 Amperes. Your device must be
used with grounded socket and grounded socket must be
outside the heater area and the hot surface. Also, it must be
checked whether the socket is loose or damaged. Because loose
sockets damage the device and the power main.
Your device must not be used connected to the same power
cable or fuse with another device.
Power cord must not be left on the hot body of the device or
near it.
If your device will not be used for a long period of time, if
cleaning or maintenance will be conducted, the device must be
unplugged. It must be ensured that the device has cooled down.