ASROCK M3A-GLAN Manual Del Usuario página 7

Tabla de contenido

Publicidad

WARNING
Please realize that there is a certain risk involved with overclocking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using
the third-party overclocking tools. Overclocking may affect your system stability, or
even cause damage to the components and devices of your system. It should be
done at your own risk and expense. We are not responsible for possible damage
caused by overclocking.
CAUTION!
1.
This motherboard supports Untied Overclocking Technology. Please read "Un-
tied Overclocking Technology" on page 20 for details.
2.
This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 11 for proper installation.
3.
Whether 1066MHz memory speed is supported depends on the AM2+ CPU
you adopt. If you want to adopt DDR2 1066 memory module on this
motherboard, please refer to the memory support list on our website for
the compatible memory modules.
ASRock website
http://www.asrock.com
4.
Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows
®
TM
and Windows
Vista
bit with 64-bit CPU, there is no such limitation.
5.
Before installing SATAII hard disk to SATAII connector, please read the "SATAII
Hard Disk Setup Guide" on page 22 of "User Manual" in the support CD to
adjust your SATAII hard disk drive to SATAII mode. You can also connect SATA
hard disk to SATAII connector directly.
6.
Power Management for USB 2.0 works fine under Microsoft
TM
TM
Vista
64-bit / Vista
7.
It is a user-friendly ASRock overclocking tool which allows you to surveil
your system by hardware monitor function and overclock your hardware
devices to get the best system performance under Windows
Please visit our website for the operation procedures of ASRock OC
Tuner. ASRock website: http://www.asrock.com
8.
Featuring an advanced proprietary hardware and software design,
Intelligent Energy Saver is a revolutionary technology that delivers
unparalleled power savings. The voltage regulator can reduce the
number of output phases to improve efficiency when the CPU cores are
idle. In other words, it is able to provide exceptional power saving and
improve power efficiency without sacrificing computing performance. To
use Intelligent Energy Saver function, please enable Cool 'n' Quiet option
in the BIOS setup in advance. Please visit our website for the operation
procedures of Intelligent Energy Saver.
ASRock website: http://www.asrock.com
ASRock
®
. For Windows
XP 64-bit and Windows
/ XP 64-bit / XP SP1 or SP2.
M3A-GLAN
Motherboard
®
XP
®
TM
Vista
64-
®
®
Windows
®
environment.
7 7 7 7 7

Publicidad

Tabla de contenido
loading

Tabla de contenido