HAMPTON BAY BPT13-13D-1 Guía De Uso Y Cuidados página 3

Airflow: 70 CFM
120 V, 60 Hz
Duct diameter: 3 in.
Sound output: 2.0 Sone
The ducting from this fan to the outside of the
building has a strong effect on the air ow, noise and
energy use of the fan. Use the shortest, straightest
duct routing possible for best performance, and
avoid installing the fan with smaller ducts than
recommended. Insulation around the ducts can
reduce energy loss and inhibit mold growth. Fans
installed with existing ducts may not achieve
their rated air ow.
Power consumption: 25W
Gross Weight: 6.42 lbs.
Ceiling Opening Dimension Requirements: 7.3 in. (L) x 7.5 in. (W)
x 6.2 in. (H)
QUICK CONNECTOR INSTRUCTIONS
To be sold only with installation instructions.
WARNING:
Wiring must comply with all applicable electrical
codes. Turn OFF power before removing or installing connectors.
WARNING:
COPPER TO COPPER ONLY. Do not use Aluminum wire.
CAUTION:
Accessory part (quick connector) should meet
installation instructions below.
NOTE:
The connector is reusable on solid wires of the same wire gage or
smaller. Do not reuse the connector on stranded wires.
• Strip wires 3/8"-1/2"
• Grip the wire firmly and push
the stripped end of the wire into
the open port of the connector.
Use only one conductor
per port.
• Verify the stripped end of the
wires is fully inserted to the
back of the connector.
NOTE:
The acceptable wire range includes: Solid: 12-18 AWG.
Please contact 1-855-HD-HAMPTON for further assistance.
Quick
connect
Product
wires
House
wires
HAMPTONBAY.COM