Tabla de contenido
Publicidad
SCANNER MODES
Adding Memory to Your Scanner by Using a SD Memory Card
Battery Life Indication
Insert an SD card into the SD Slot located on the right side of the scanner.
The SD card can only be inserted in one direction (label side up). Make
sure that the "write protection" switch is set to "off" on the SD card, or else
the scanner will not be able to use it. When an SD card is inserted to the
scanner, the scanner will only save pictures to the SD card. When the SD
card is removed, the scanner will save scans to its internal memory.
You will see an SD icon appear on the LCD when you have an SD card
inserted in the scanner.
Battery Life Indication
The battery icon will begin to flash when the batteries run low on your
scanner. Even if you run out of batteries, you will not lose the pictures that
are in your scanner. The pictures will stay in your scanner until you erase
them.
16
Publicidad
Tabla de contenido
