Connect To Ps3 - Triton AX720 Manual De Producto

Set up – Connect To PS3
TRITTONUSA
1. (See Diagram) Plug one end of the optical cable into the rear of the PS3 and the other end of
the optical cable into the rear of the AX 720 Amp
2. (See Diagram) Connect one end of the USB Communication cable to a USB port on the PS3
and the other end to the AX 720 Amp
3. Start the PS3, go to Settings > Accessory Settings > Audio Device Settings, and set both the
input and output to "C-MEDIA USB". You can see a visual confirmation that the microphone is
functioning if the bar graph moves. If you do not see any movement, ensure the mute switch
is configured correctly and that all connections, including the microphone, are tight and fully
inserted
4. Under sound settings, change the audio output to be "Digital Optical" with Dolby 5.1 checked.
Make sure that the DTS box is NOT checked as this will cause some games to have no audio
5. Test connections by powering on the PS3 and AX 720 and watch to ensure that the "Dolby
Digital" light on the AX 720 Amp illuminates white as a game or movie starts
®
1
DC
Voice To PS3
Optical
2
Front of PS3
9