Troubleshooting & Solution - Watts Industries BT DRF-01 Guía De Usuario

7. Troubleshooting & Solution
Batteries Problem
Problem on
sensors
Batteries level is
too less
My BT DRF-01 doesn't start
- Check if the protection sticker on the
batteries is removed.
- Check the batteries orientation.
- Check the capacity of the batteries
My BT DRF-01 Led, blinks in Red
- Contact your installer or seller.
- Check the connection of the sensor.
- Disconnect the sensor, and check it
with an ohmmeter
(the value must be around 10kohms)
The logo blinks (Batteries)
- Replace the batteries.
The logo blinks (ambient sensor)
The logo blinks (Floor sensor)
27