BOZZA BZ-2000 Instrucciones De Montaje página 35

Válvula de control de grasa digital
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

This manual contains important warnings and information.
Read and keep for reference.
WARNING
Equipment misuse can cause the equipment to rupture or malfunction and
result in serious injury even death.
Equipment misuse hazard
Any misuse will lead to the damage, failure, rupture or malfunction of the
equipment.
-This equipment is for professional use only.
-Read all instruction manuals, tags, and labels before operating the
equipment.
-Use the equipment only for its intended purpose. If you are not sure, call
your distributor.
-Do not alter or modify this equipment.
-Do not exceed the maximum working pressure of the lowest rated system
component. This equipment has a 9000psi (60Mpa, 600bar) maximum
working pressure.
-Check equipment daily. Repair or replace worn or damaged parts
immediately.
-Handle hoses carefully. Do you pull on hoses to move the equipment.
-Route hose away from traffic areas, sharp edges, moving parts, and hot
surfaces. Do not expose hoses to temperatures above 66? (150°F) or
below -40°C (-40°F).
-Comply with all application local, state, and national fire, electrical, and
safety regulations.
-Do not use a low pressure flexible extension on a high pressure
dispensing valve.
-Please wear hot-proof grove when use it.
-Do not move or aloft the equipment when use it.
-Do not attempt to force lubricant into a fitting.
-The operation environment must be fire-proof, safety electric use and
other security assured.

Publicidad

Tabla de contenido
loading

Tabla de contenido