Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Fig 3: The LCD panel displays region
1 Section: 4 show the current flow range (0.1~999.9).
Measurement exceeds the maximum value will become zero and start re-
measure.
2 Section: Battery condition (Full power or no power; If low power, alarm
device will start)
3 Section: Model identification (Operation as the instructions, the arrow
can be removed)
4 Section: The batch total can be reset and switched.
5 Section: 7 batch total can reset the total amount or value of total system
(system total can not reset;
the scope is 1 〜 99999.9)
6 Section: Velocity model identifier
7 Section: The unit of measurement (g, ml, oz)
8 Section: The unit of total measurement (L, Ib, kg)
2.2 Manipulation: Two keys, the left key pressed for the menu (sw2),
the right one is to reset (sw1)
Publicidad
Tabla de contenido
