AEG MRC 4122 F Instrucciones De Servicio página 68

English
68
Turning off the Alarm
Press the button (3) to stop the alarm.
Automatic Alarm Interval
The automatically set alarm function can be shut off for approximately 9 minutes with the
SNOOZE/SLEEP button (2).
Deactivate the Alarm Function
To deactivate the alarm function, press the AL.1
of the unit) until no alarm symbol is shown on the display.
Delayed Shut-Off
You can use the function for delayed power-off with radio operation. The unit is switched
off automatically when the selected time is reached.
• Select the time after which the unit is switched off by repeatedly pressing the
SNOOZE/SLEEP button (2). The following selections can be made: SLEEP 90, 60, 30
and 15 minutes.
• This function can be cancelled with the button (3).
Projection
NOTE: Important!
• While the unit searches for a signal, the projecting display can only be rotated or
turned on/off if the unit is in operation.
• The display can only be seen in a darkened room.
With this unit, you can project the time onto a wall or the ceiling.
• You can switch this function on and off with the ON/OFF / PROJECTION button (15).
• Rotate the projector (13) to the desired position.
• The rear of the projector has a setting wheel (15), with which you can adjust the sharp-
ness of the projection.
• You can use the 180° FLIP button (15) to flip the projection by 180 degrees.
button or the AL.2 button (back